Chemicals

CONSUMABLE & SPARES FOR SINGLE SIDED PCB


 

ITEMS                                                   Packing Available


 

*  Single Sided PCB Laminate

  • Phenolic 300mm × 280mm……………………… 05 nos.

*  For Dark Room Items

  • Lith Film 250mm ×300mm………………………. 05 nos.
  • Lith Film Developer A & B………………………. 01 set
  • (2.5 Liter of A and 2.5 of B)
  • Lith Film Fixer……………………………………… 01 Kg.

*  For Poto Resist Dip Coating Machine

  • Liquid Photo Resist………………………………. 01 Ltrs.
  • Photo Resist Thinner…………………………….. 01 Ltrs.
  • Photo Resist Developer………………………….. 05 Ltrs.
  • Photo Resist Blue Dye……………………………. 05 Ltrs.

*  For Etching Machine

  • Etching Chemical in Solid Form…………….. 10 Kg.

*  Accessories for Above Machine

  • Steel Wool…………………………………………… 01 Pct.
  • Tray for Film Development……………………… 03 Nos.
  • Pairs of Gloves …………………………………………01 Nos.
ETA-TPH

THRU HOLE PLATING

TECHNICAL SPECIFICATIONS

  • Prototype PCB Plating unit for R&D, small scale PTH PCB Runs and institutes
  • Fully Poly Propylene & housed in metal frame
  • Corrosion-Free constriction with optimum sized tanks for quality boards and minimum chemical Consumption.

     

  • Max (Finished) PCB Size: 250mm×305mm (10”×12”).
  • Total process Tanks :12 nos. for Conditioner, Mild Etch, Acid Dip, catalyst, Activator,
  • Accelerator, Electro less Cooper, Anti tarnish, Acid soak, Cooper plating, Sulphuric acid, Tin plating.
  • Rinse Stations : 02 Nos
  • Plating Tanks : 02 Nos
  • Rectifier : 0-20 Amps, 0-8 Volts (Cont. Variable)
  • Mechanical Agitation: AC/DC Motor for all tank
  • Heaters : 02 Nos. Titanium with thermostat
  • Leakage proof tanks
  • No effect of chemical reactions on the tanks
  • All tanks are provided with their cover lid
  • Stain less steel rods/clips to hang PCB
  • Variac controlled speed for both plating tanks
  • Supplied with protection gear.
  • Electrical Power : 230V/50Hz, 15A

ANODES

  • Copper (Phosphorised)-2 Nos.,
  • Tin (100% Pure)-2Nos.
  • Anode Bags- 4Nos.
ETA-DFL

DRY FILM LAMINATOR

TECHNICAL SPECIFICATIONS

  • The ETA-DFL is rugged Laminator for applying Dry Film
  • Proto resist on Copper Clad Laminates.
  • Working width : 300mm/380mm/450mm
  • Maximum panel thickness : 0.3mm to 5.0mm
  • Roller Pressure : Variable Spring Loaded
  • Laminating Speed : Adjustable – Solid State Speed Control
  • Upper Roller : Spring Loaded
  • Lower Roller : Motor Driven
  • Electrical Power : 230V, 50Hz, 5A
  • Stand (Optional)
ETA-FMU

PCB FILM MAKING UNIT

TECHNICAL SPECIFICATIONS

  • A table top unit which serves as a negative making contact printer as well as illuminated art work table for circuits.
  • Electronic digital timer : 0-99 Sec.
  • Avoiding use of expensive cameras.
  • Direct make negative from 1×1scale art work
  • Working area with diffused light :
    • 200mm×200mm (8″×8”) STANDARD
    • 300mm×250mm (12″×10″) on demand
  • Equipped with protective light so user can work in dark room without damaging expensive film.
  • Push button operated exposure.
  • Electrical Power : 230V/50Hz
  • 8”×8” is a standard size, suitable for almost all teaching app. It requires 25% less chemicals  than 12”×10” size.
ETA-PDCM

PHTO RESIST DIP COATING MACHINE

TECHNICAL SPECIFICATIONS

  • The Machine is tabletop and compact
  • A single operation unit designed for coating of photo resist laminate on copper clad
  • The machine ensure uniform controlled thickness of Photo resist on copper clad
  • Maximum Board size :
    • 200mm×200mm (8″×8”) STANDARD
    • 300mm×250mm (12″×10″) on demand
  • Tank Capacity : 1.5 liters (Dip 1 PCB at a time)
  • Motorised lead screw system
  • Micro switch to prevent motor from getting damage
  • Electrical power : 230V/50Hz
  • 8”×8” is a standard size, suitable for almost all teaching app. It requires 25% less chemicals  than 12”×10” size
ETA-PDD

DYE DEVELOPER (2 IN 1)

  • Table unit which gives convenience of dying and developing both in one machine
  • Diaphragm pump agitates the dye solution chamber
  • Maximum PCB size : 200mm×200mm (8″×8″)
  • Tank capacity :
    • 1.5 Liters for developer solution
    • 1.5 Liters for dye solution.
  • Air pump : Diaphragm type compressor pump
  • Timer : 0-999 sec digital timer
  • Mechanical timer : 0-6min. to operate air pump
  • Leakage proof tanks
  • Electrical power : 230V/50Hz, 5A
ETA-CM

PCB CURRING MACHINE

  • Table top unit for curing of PCB.
  • Timer controlled heating system allows fast and efficient PCB curing.
  • All construction material are corrosion free.
  • PCB size:
    • 200mm×200mm (8″×8”) STANDARD
    • 300mm×250mm (12″×10″) on demand
  • Heating : titanium heater
  • Timer : 0-999 sec digital timer
  • Electrical Power : 230V/50Hz
  • 8”×8” is a standard size, suitable for almost all teaching app. It requires 25% less chemicals than 12”×10” size.
ETA-EM

PCB ETCHING MACHINE

  • Fast single and double sided PCB etching.
  • Useful etching area :
    • 200mm×200mm (8″×8”) STANDARD
    • 300mm×250mm (12″×10″) on demand
  • All construction material are corrosion free.
  • Tank Capacity : 20 Liters/10 Liters
  • Timer : 0-999 sec digital timer
  • Heater and air flow compressor.
  • Heater : Titanium-non corrosive with thermostat control.
  • Leakage proof tank.
  • Electrical Power : 230V/50Hz
  • 8”×8” is a standard size, suitable for almost all teaching app. It requires 25% less chemicals than 12”×10” size.
ETA-DM

PCB DRILLING MACHINE

  • A compact tabletop high speed drilling machine
  • Drill holding by precision chuck with lapped jaws
  • Mains operated AD/DC motor – direct drive/belt drive
  • Motor Speed : up to 14,000 RPM at no load ( ETA-DM)
  • Range : 0.6 to 3.0mm. Metal base
  • Working area : 280mm×170mm.
  • Electrical Power : 230V/50Hz
ETA-SM

PCB Shearing Machine

  • Bench top guillotine type shearing machine to cut PCB’s and laminates
  • Compact structure
  • Central handle allows ease of cutting
  • Heavy Springs that allows cutter to come up after cutting PCB
  • Superior quality blade for cutting Glass Epoxy Boards
  • Width :
    • 250mm (10″) STANDARD
    • 300mm (12″) on demand
  • Size : 400mm×350mm
  • Long handle