8031LCD

8031/51 Microcontroller Kit with LCD display
(VMC-31/51LCD)

SPECIFICATIONS

  • Based on 8051/89C52 Microcontroller
  • On board 32K RAM with battery backup
  • 64 K bytes of EPROM with powerful monitor program
  • Memory expandable upto 256KB using four 28 pin sockets
  • 3 channel programmable timer/counter using 8253
  • IBM PC compatible keyboard
  • 20 x 2 LCD display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • 48 I/O lines using 2 nos. of 8255
  • IBM PC keyboard
  • Two External interrupts INT0 & INT1
  • RS-232C interface using 8251
  • One serial USART interface provided by 89C51/89C52
  • Auxiliary RS-232C using serial pins of 80C31
  • All data, address and control signals (TTL compatible) available at FRC connector
  • Powerful software commands like INSERT, DELETE, BLOCK MOVE, SET / CLEAR BREAK POINT, SINGLE STEP, EXAMINE THROUGH REGISTER, EXECUTE, EXAMINE, MODIFY, PROGRAM / DATA/INTERNAL MEMORY etc
    Uploading/Downloading facility from PC in Intel Hex format
  • Enclosed in an attractive ABS plastic cabinet
  • In-built Power Supply
  • User’s Manual.
VMC-31-51

8031/51 MICROCONTROLLER KIT WITH LED DISPLAY & USB INTERFACE (VMC-31/51U)

SPECIFICATIONS

  • Based on 8031/8051/8751 operating at 10/12 Mhz.
  • On board 8K RAM.
  • Battery backup for RAM area.
  • 8/16K bytes of EPROM with powerful monitor program.
  • Total memory expandable upto 128K Bytes using four 28 pin sockets.
  • 48 I/O lines using 2 nos. of 8255.
  • Two External interrupts INT0 & INT1.
  • Hexadecimal Keyboard & six Seven Segment displays.
  • RS-232C interface using 8251.
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Auxiliary RS-232C using serial pins of 80C31.
  • All data, address and control signals (TTL compatible) available at FRC connector.
    Powerful software commands like INSERT, DELETE, BLOCK MOVE, SET / CLEAR BREAK POINT, SINGLE STEP, EXAMINE THROUGH REGISTER, EXECUTE, EXAMINE, MODIFY, PROGRAM / DATA/INTERNAL MEMORY etc.
  • Uploading/Downloading facility from PC in Intel Hex format.
  • Enclosed in an attractive ABS plastic cabinet with cover.
  • In-built Power Supply
  • User’s Manual.
VMC-31-51

8031/51 MICROCONTROLLER KIT WITH LED DISPLAY (VMC-31/51)

SPECIFICATIONS

  • Based on 8031/8051/8751 operating at 10/12 Mhz.
  • On board 8K RAM.
  • Battery backup for RAM area.
  • 8/16K bytes of EPROM with powerful monitor program.
  • Total memory expandable upto 128K Bytes using four 28 pin sockets.
  • 48 I/O lines using 2 nos. of 8255.
  • Two External interrupts INT0 & INT1.
  • Hexadecimal Keyboard & six Seven Segment displays.
  • RS-232C interface using 8251.
  • Auxiliary RS-232C using serial pins of 80C31.
  • All data, address and control signals (TTL compatible) available at FRC connector.
    Powerful software commands like INSERT, DELETE, BLOCK MOVE, SET / CLEAR BREAK POINT, SINGLE STEP, EXAMINE THROUGH REGISTER, EXECUTE, EXAMINE, MODIFY, PROGRAM / DATA/INTERNAL MEMORY etc.
  • Uploading/Downloading facility from PC in Intel Hex format.
  • Enclosed in an attractive ABS plastic cabinet with cover.
  • In-built Power Supply
  • User’s Manual.
VMC-8603

8086/88 MICROPROCESSOR KIT WITH LED DISPLAY, ADC, DAC & USB INTERFACE (VMC-8603ADU)

SPECIFICATIONS

  • Based on Intel’s 8086/8088 CPU operating at 2.5/5MHz
  • 16K bytes of RAM available to the user using 6264
  • 16K bytes of EPROM loaded with powerful monitor program (2764/27128)
  • Total on board memory capacity of 128KB of RAM & 128KB of EPROM
  • Battery backup provided for RAM area
  • 48 I/O lines through 2 nos. of 8255
  • 16 bit Timer/Counter through 8253
  • RS-232C for CRT Terminal through 8251 Baud rate selection through DIP switch from 110-19,200 baud
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Provision for EPROM Programmer for 2732/2764/27256 with 28 pin ZIF with facility to Program, Verify, List & Blank Check for Even, Odd & Continuous bytes
  • 25/28 keys hexadecimal keyboard & eight seven segment display.
  • On board Analog to Digital Converter
  • On board Digital to Analog Converter
  • EPROM Programmer
  • Onboard sockets provided to facilitate the use of 8089 I/O processor & 8087 Numeric Data Processor (Optional)
  • Resident Monitor with two modes of operation:
    – Keyboard mode & Serial mode
  • Powerful software commands like GO, EXAMINE/ MODIFY REGISTERS, SINGLE STEPPING, BLOCK MOVE, FILL, INSERT, DELETE, INPUT/OUTPUT BYTE & WORD
  • Facility for uploading/downloading of files from/to PC
  • All Address, Data and Control Signals, are buffered and available at the FRC connector
  • Enclosed in an attractive ABS plastic cabinet
  • In-built Power Supply
  • User’s Manual

 

 

 

VMC-8603

8086/88 MICROPROCESSOR KIT WITH LED DISPLAY, ADC & DAC (VMC-8603AD)

SPECIFICATIONS

  • Based on Intel’s 8086/8088 CPU operating at 2.5/5MHz
  • 16K bytes of RAM available to the user using 6264
  • 16K bytes of EPROM loaded with powerful monitor program (2764/27128)
  • Total on board memory capacity of 128KB of RAM & 128KB of EPROM
  • Battery backup provided for RAM area
  • 48 I/O lines through 2 nos. of 8255
  • 16 bit Timer/Counter through 8253
  • RS-232C for CRT Terminal through 8251 Baud rate selection through DIP switch from 110-19,200 baud
  • Provision for EPROM Programmer for 2732/2764/27256 with 28 pin ZIF with facility to Program, Verify, List & Blank Check for Even, Odd & Continuous bytes
  • 25/28 keys hexadecimal keyboard & eight seven segment display.
  • On board Analog to Digital Converter
  • On board Digital to Analog Converter
  • EPROM Programmer
  • Onboard sockets provided to facilitate the use of 8089 I/O processor & 8087 Numeric Data Processor (Optional)
  • Resident Monitor with two modes of operation:
    – Keyboard mode & Serial mode
  • Powerful software commands like GO, EXAMINE/ MODIFY REGISTERS, SINGLE STEPPING, BLOCK MOVE, FILL, INSERT, DELETE, INPUT/OUTPUT BYTE & WORD
  • Facility for uploading/downloading of files from/to PC
  • All Address, Data and Control Signals, are buffered and available at the FRC connector
  • Enclosed in an attractive ABS plastic cabinet
  • In-built Power Supply
  • User’s Manual
VMC-8603

8086/8088 MICROPROCESSOR KIT WITH LED DISPLAY & USB INTERFACE (VMC-8603U)

SPECIFICATIONS

  • Based on Intel’s 8086/8088 CPU operating at 2.5/5MHz
  • 16K bytes of RAM available to the user using 6264
  • 16K bytes of EPROM loaded with powerful monitor program (2764/27128)
  • Total on board memory capacity of 128KB of RAM & 128KB of EPROM
  • Battery backup provided for RAM area
  • 48 I/O lines through 2 nos. of 8255
  • 16 bit Timer/Counter through 8253
  • RS-232C for CRT Terminal through 8251 Baud rate selection through DIP switch from 110-19,200 baud
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Provision for EPROM Programmer for 2732/2764/27256 with 28 pin ZIF with facility to
  • Program, Verify, List & Blank Check for Even, Odd & Continuous bytes
  • 25/28 keys hexadecimal keyboard & eight seven segment display.
  • Resident Monitor with two modes of operation:
    – Keyboard mode & Serial mode
  • Powerful software commands like GO, EXAMINE/ MODIFY REGISTERS, SINGLE
  • STEPPING, BLOCK MOVE, FILL, INSERT, DELETE, INPUT/OUTPUT BYTE & WORD
  • Facility for uploading/downloading of files from/to PC
  • All Address, Data and Control Signals, are buffered and available at the FRC connector
  • Enclosed in an attractive ABS plastic cabinet
  • In-built Power Supply
  • User’s Manual
VMC-8603

8086/88 MICROPROCESSOR KIT WITH LED DISPLAY (VMC-8603)

SPECIFICATIONS

  • Based on Intel’s 8086/8088 CPU operating at 2.5/5MHz
  • 16K bytes of RAM available to the user using 6264
  • 16K bytes of EPROM loaded with powerful monitor program (2764/27128)
  • Total on board memory capacity of 128KB of RAM & 128KB of EPROM
  • Battery backup provided for RAM area
  • 48 I/O lines through 2 nos. of 8255
  • 16 bit Timer/Counter through 8253
  • RS-232C for CRT Terminal through 8251 Baud rate selection through DIP switch from 110-19,200 baud
  • Provision for EPROM Programmer for 2732/2764/27256 with 28 pin ZIF with facility to
  • Program, Verify, List & Blank Check for Even, Odd & Continuous bytes
  • 25/28 keys hexadecimal keyboard & eight seven segment display.
  • Resident Monitor with two modes of operation:
    – Keyboard mode & Serial mode
  • Powerful software commands like GO, EXAMINE/ MODIFY REGISTERS, SINGLE STEPPING, BLOCK MOVE, FILL, INSERT, DELETE, INPUT/OUTPUT BYTE & WORD
  • Facility for uploading/downloading of files from/to PC
  • All Address, Data and Control Signals, are buffered and available at the FRC connector
  • Enclosed in an attractive ABS plastic cabinet
  • In-built Power Supply
  • User’s Manual
VMC8609NIOU

8086/88 MICROPROCESSOR KIT WITH LCD DISPLAY, ADC, DAC & USB INTERFACE (VMC-8609NIOU)

SPECIFICATIONS

  • Based on 8086/8088 Microprocessor
  • Onboard sockets provided to facilitate the use of 8089 I/O processor & 8087 Numeric Data Processor with printer interface
  • Onboard assembler & disassembler
  • 16K Bytes of EPROM Loaded with monitor expandable to 256K Bytes using 27256 with commands like Assemble, Display or Modify Data, Unassembled, Trace, Go
  • 16K bytes of CMOS RAM expandable to 128K Bytes using 6264/62256
  • 72 I/O lines using three nos. of 8255
  • 8 different level interrupt through 8259
  • Three 16 bit Timer/Counter through 8253
  • 104/105Keys IBM PC Compatible ASCII Keyboard
  • 20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • RS-232C Port using 8251
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • On board 8 channel 8 Bit ADC
  • On board Single channel 8 bit DAC
  • Real time clock (optional)
  • EPROM Programmer (Optional)
  • All address, data and control signals (TTL Compatible) available at edge connector as per Multi Bus. The kit also has its own Resident Bus
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
VMC8609ADP

8086/88 MICROPROCESSOR KIT WITH LCD DISPLAY, ADC, DAC & USB INTERFACE (VMC-8609ADU)

SPECIFICATIONS

  • Based on 8086/8088 Microprocessor
  • Onboard assembler & disassembler
  • 16K Bytes of EPROM Loaded with monitor expandable to 256K Bytes using 27256 with commands like Assemble, Display or Modify Data, Unassembled, Trace, Go
  • 16K bytes of CMOS RAM expandable to 128K Bytes using 6264/62256
  • 72 I/O lines using three nos. of 8255
  • 8 different level interrupt through 8259
  • Three 16 bit Timer/Counter through 8253
  • 104/105Keys IBM PC Compatible ASCII Keyboard
  • 20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • RS-232C Port using 8251
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • On board 8 channel 8 Bit ADC
  • On board Single channel 8 bit DAC
  • Real time clock (optional)
  • EPROM Programmer (Optional)
  • All address, data and control signals (TTL Compatible) available at edge connector as per Multi Bus. The kit also has its own Resident Bus
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
VMC8609

8086/88 MICROPROCESSOR KIT WITH LCD DISPLAY & USB INTERFACE (VMC-8609U)

SPECIFICATIONS

  • Based on 8086/8088 Microprocessor
  • Onboard assembler & disassembler
  • 16K Bytes of EPROM Loaded with monitor expandable to 256K Bytes using 27256 with commands like Assemble, Display or Modify Data, Unassembled, Trace, Go
  • 16K bytes of CMOS RAM expandable to 128K Bytes using 6264/62256
  • 72 I/O lines using three nos. of 8255
  • 8 different level interrupt through 8259
  • Three 16 bit Timer/Counter through 8253
  • 104/105Keys IBM PC Compatible ASCII Keyboard
  • 20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • RS-232C Port using 8251
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • All address, data and control signals (TTL Compatible) available at edge connector as per Multi Bus. The kit also has its own Resident Bus
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
VMC8609

8086/88 MICROPROCESSOR KIT WITH LCD DISPLAY (VMC-8609)

SPECIFICATIONS

  • Based on 8086/8088 Microprocessor
  • Onboard assembler & disassembler
  • 16K Bytes of EPROM Loaded with monitor expandable to 256K Bytes using 27256 with commands like Assemble, Display or Modify Data, Unassembled, Trace, Go
  • 16K bytes of CMOS RAM expandable to 128K Bytes using 6264/62256
  • 72 I/O lines using three nos. of 8255
  • 8 different level interrupt through 8259
  • Three 16 bit Timer/Counter through 8253
  • 104/105Keys IBM PC Compatible ASCII Keyboard
  • 20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • RS-232C Port using 8251
  • All address, data and control signals (TTL Compatible) available at edge connector as per Multi Bus. The kit also has its own Resident Bus
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
8085 Microprocessor Kit with LED / Hex Display

8085 MICROPROCESSOR KIT WITH LED DISPLAY & USB INTERFACE (VMC-8503U)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264/ 62256
  • with 1 socket of 28 pin
  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 48 I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Two modes of commands: Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • 25/28 key hexadecimal keyboard and six seven segment displays through 8279
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual
8085 Microprocessor Kit with LED / Hex Display

8085 MICROPROCESSOR KIT WITH LED DISPLAY (VMC-8503)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264/ 62256
  • with 1 socket of 28 pin
  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 48 I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • Two modes of commands: Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • 25/28 key hexadecimal keyboard and six seven segment displays through 8279
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual
8085 Microprocessor Kit with LED / Hex Display

8085 MICROPROCESSOR KIT WITH LED DISPLAY & USB INTERFACE (VMC-8502U)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264/ 62256
  • with 1 socket of 28 pin
  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 24 I/O lines provided through 8255
  • 22 I/O lines provided through 8155
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Two modes of commands: Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • 25/28 key hexadecimal keyboard and six seven segment displays through 8279
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual
8085 Microprocessor Kit with LED / Hex Display

8085 MICROPROCESSOR KIT LED DISPLAY (VMC-8502)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264/ 62256
  • with 1 socket of 28 pin
  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 24 I/O lines provided through 8255
  • 22 I/O lines provided through 8155
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • Two modes of commands: Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • 25/28 key hexadecimal keyboard and six seven segment displays through 8279
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual
8085 Microprocessor Kit with LED / Hex Display

8085 MICROPROCESSOR KIT WITH LED DISPLAY & USB INTERFACE (VMC-8501U)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264/ 62256 with 1 socket of 28 pin
  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 24 I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • Two modes of commands: Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • 25/28 key hexadecimal keyboard and six seven segment displays through 8279
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual
8085 Microprocessor Kit with LED / Hex Display

8085 MICROPROCESSOR KIT WITH LED DISPLAY (VMC-8501)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264/ 62256 with 1 socket of 28 pin
  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 24 I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • Two modes of commands: Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • 25/28 key hexadecimal keyboard and six seven segment displays through 8279
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial & Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual
STUDENT-85AD

8085 MICROPROCESSOR KIT WITH LCD DISPLAY, ADC, DAC & USB INTERFACE (STUDENT-85ADU)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • 48 programmable I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Two modes of commands: – Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per
  • STD bus configuration
  • IBM PC Compatible ASCII Keyboard
  • 16×2 LCD display for standard model
    [Display can be replace by 20×2 or 20×4 or 40×2 on request at additional cost]
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move,
  • Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO,
  • Break Point in both Serial and Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • On board Disassembler
  • Battery back up provided
  • I/O lines Controlled
  • 8 LED using 8 nos. of I/O lines
  • 2 Relay of 12V & 1 Opto
  • 8 Bit DAC using DAC-0800
  • 8 Channel 8 Bit ADC using ADC-0809
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-Built Power Supply
  • User’s Manual
STUDENT-85AD

8085 MICROPROCESSOR KIT WITH LCD DISPLAY & ADC, DAC (STUDENT-85AD)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • 48 programmable I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • Two modes of commands: – Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per
  • STD bus configuration
  • IBM PC Compatible ASCII Keyboard
  • 16×2 LCD display for standard model
    [Display can be replace by 20×2 or 20×4 or 40×2 on request at additional cost]
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move,
  • Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO,
  • Break Point in both Serial and Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • On board Disassembler
  • Battery back up provided
  • I/O lines Controlled
  • 8 LED using 8 nos. of I/O lines
  • 2 Relay of 12V & 1 Opto
  • 8 Bit DAC using DAC-0800
  • 8 Channel 8 Bit ADC using ADC-0809
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-Built Power Supply
  • User’s Manual
STUDENT-85

8085 MICROPROCESSOR KIT WITH LCD DISPLAY & USB INTERFACE (STUDENT-85U)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • 48 programmable I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Two modes of commands: – Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • IBM PC Compatible ASCII Keyboard
  • 16×2 LCD display for standard model
    [Display can be replace by 20×2 or 20×4 or 40×2 on request at additional cost]
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial and Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • On board Disassembler
  • Battery back up provided
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-Built Power Supply
  • User’s Manual
STUDENT-85

8085 MICROPROCESSOR KIT WITH LCD DISPLAY (STUDENT-85)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 8K bytes of EPROM loaded with powerful monitor program
  • 8K bytes of RAM available to the user
  • Total on board memory expansion upto 64K bytes
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • 48 programmable I/O lines provided through 8255
  • RS-232C interface through SID/SOD Lines with Auto baud rate
  • Two modes of commands: – Hex Key pad & Serial mode
  • All address, data & control lines are buffered and made available at the edge connector as per STD bus configuration
  • IBM PC Compatible ASCII Keyboard
  • 16×2 LCD display for standard model
    [Display can be replace by 20×2 or 20×4 or 40×2 on request at additional cost]
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial and Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • On board Disassembler
  • Battery back up provided
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-Built Power Supply
  • User’s Manual
8085 Microprocessor trainer with adc,

8085 MICROPROCESSOR KIT WITH LCD DISPLAY, ADC, DAC & USB INTERFACE (VMC-8509ADU)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 16K bytes of EPROM with powerful monitor program
  • 16K byte of RAM available to the use
  • Battery backup for user’s RAM with 3.6V rechargeable cell
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264
  • Memory mapping definable by the user
  • 20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • 104/105KeysIBM PC Compatible ASCII Keyboard
  • 8251 USART interface through RS-232C port
  • 48 programmable I/O lines through 2 nos. of 8255
  • 16 bit programmable timer/counter using 8253
  • RS-232C interface for CRT using SID / SOD lines
  • Real Time Clock using 6264 (OPTIONAL).
  • Two modes of Commands: Key board Mode & Serial Mode
  • All address, data and control lines are buffered & made available at connector as per STD Bus configuration
  • Powerful Software Commands like relocate, string, fill, insert, delete, block move, memory compare etc
  • Onboard Single Line Assembler/Disassembler
  • Facility for Downloading/Uploading files from/to PC
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Additional serial port using 8251
  • EPROM Programmer for 27 series with 28 pin ZIF
  • Interrupt Controller using 8259 & Printer Interface
  • 8 Channel 8 bit ADC using 0809
  • 1 Channel 8 bit D/A using DAC 0800
  • 1 Relay output & 1 Opto isolated input
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
8085 Microprocessor trainer with adc,

8085 MICROPROCESSOR KITWITH LCD DISPLAY & ADC, DAC INTERFACE (VMC-8509AD)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 16K bytes of EPROM with powerful monitor program
  • 16K byte of RAM available to the use
  • Battery backup for user’s RAM with 3.6V rechargeable cell
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264
  • Memory mapping definable by the user
  • 20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • 104/105KeysIBM PC Compatible ASCII Keyboard
  • 8251 USART interface through RS-232C port
  • 48 programmable I/O lines through 2 nos. of 8255
  • 16 bit programmable timer/counter using 8253
  • RS-232C interface for CRT using SID / SOD lines
  • Real Time Clock using 6264 (OPTIONAL).
  • Two modes of Commands: Key board Mode & Serial Mode
  • All address, data and control lines are buffered & made available at connector as per STD Bus configuration
  • Powerful Software Commands like relocate, string, fill, insert, delete, block move, memory compare etc
  • Onboard Single Line Assembler/Disassembler
  • Facility for Downloading/Uploading files from/to PC
  • Additional serial port using 8251
  • EPROM Programmer for 27 series with 28 pin ZIF
  • Interrupt Controller using 8259 & Printer Interface
  • 8 Channel 8 bit ADC using 0809
  • 1 Channel 8 bit D/A using DAC 0800
  • 1 Relay output & 1 Opto isolated input
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
8085 Microprocessor Trainer with LCD Display & USB Interface

8085 MICROPROCESSOR KIT WITH LCD DISPLAY AND USB INTERFACE (VMC-8509U)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 16K bytes of EPROM with powerful monitor program
  • 16K byte of RAM available to the use
  • Battery backup for user’s RAM with 3.6V rechargeable cell
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264
  • Memory mapping definable by the user
    20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • 104/105KeysIBM PC Compatible ASCII Keyboard
  • 8251 USART interface through RS-232C port
  • 48 programmable I/O lines through 2 nos. of 8255
  • 16 bit programmable timer/counter using 8253
  • RS-232C interface for CRT using SID / SOD lines
  • USB Interface to connect kit to computer
    V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler & Dissembler etc
  • Real Time Clock using 6264 (OPTIONAL).
  • Two modes of Commands: Key board Mode & Serial Mode
  • All address, data and control lines are buffered & made available at connector as per STD Bus configuration
  • Powerful Software Commands like relocate, string, fill, insert, delete, block move, memory compare etc
  • Onboard Single Line Assembler/Disassembler
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual
8085 Microprocessor Trainer with LCD Display & USB Interface

8085 MICROPROCESSOR KIT WITH LCD DISPLAY (VMC-8509)

SPECIFICATIONS

  • Based on 8085 CPU operating at 6.144 MHz crystal
  • 16K bytes of EPROM with powerful monitor program
  • 16K byte of RAM available to the use
  • Battery backup for user’s RAM with 3.6V rechargeable cell
  • Total on board memory expansion upto 64K bytes using 2732/2764/27128/6264
  • Memory mapping definable by the user
    20×2 Liquid Crystal Display for standard model
    [Display can be replace by 20×4 or 40×2 on request at additional cost]
  • 104/105KeysIBM PC Compatible ASCII Keyboard
  • 8251 USART interface through RS-232C port
  • 48 programmable I/O lines through 2 nos. of 8255
  • 16 bit programmable timer/counter using 8253
  • RS-232C interface for CRT using SID / SOD lines
  • Real Time Clock using 6264 (OPTIONAL).
  • Two modes of Commands: Key board Mode & Serial Mode
  • All address, data and control lines are buffered & made available at connector as per STD Bus configuration
  • Powerful Software Commands like relocate, string, fill, insert, delete, block move, memory compare etc
  • Onboard Single Line Assembler/Disassembler
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power Supply
  • User’s Manual